| № | Номер | Название | Опции | Альт |
|---|
| D23629 | | SPACER - valve mounting | |
| D24490 | | VALVE - hydraulic control (See Figure 070 for breakdown) Use D26885 valve and D26883 criss-cross relief | |
| D26509 | | VALVE - hydraulic control (See Figure 070 for breakdown) Use D26885 valve and D26883 criss-cross relief | |
| D26885 | | VALVE - hydraulic control (See Figure 074 for breakdown) See D24490 valve and D26509 valve | |
| NSS | NOT SOLD SEPARAT | 1/2" - 13 NC x 5" hex. head cap screw (13-880) | |
| NSS | NOT SOLD SEPARAT | 1/2" lockwasher (92-8) | |
| NSS | NOT SOLD SEPARAT | 1/2" - 13 NC hex. nut (25-108) | |
| NSS | NOT SOLD SEPARAT | 1/2" plain washer (Used with D26509 and D26885 valves) (95-8) | |
| 50875 | NUT | - hex. jam, special (Bulkhead tees and criss-cross relief valve) (7/8" - 14 NF), boom sylinder hydraulics | |
| D20045 | PLATE ASSY. | CLAMP - hose, boom cylinder hydraulics | |
| NSS | NOT SOLD SEPARAT | 5/16" - 18 NC x 2" hex. head cap screw (13-532), boom cylinder hydraulics | |
| NSS | NOT SOLD SEPARAT | 5/16" lockwasher (92-5), boom cylinder hydraulics | |
| NSS | NOT SOLD SEPARAT | 5/16" - 18 NC hex. nut (25-105), boom cylinder hydraulics | |
| D24074 | | TUBE - hose to flow control valve, boom cylinder hydraulics | |
| D24345 | HOSE ASSY. | HOSE - bulkhead to boom cylinder (1/2" I.D. x 7/8" O.D. x 31" long), hydraulics | |
| D25027 | | CYLINDER - boom, hydraulic (With tie rods - 1-3/4" dia. piston rod) Use D27156 cylinder with tie rods and 2" dia. piston rod until stock is exhausted then use D27751 cylinder, D29020 tube, and 218-5065 connector (See Figure 096 for breakdown) | |
| D25090 | X | HOSE - lower valve port to bulkhead (1/2" I.D. x 7/8" O.D. x 20-1/4" long) Use D29155, boom cylinder hydraulics | |
| NSS | NOT SOLD SEPARAT | "O" ring seal, D25090 hose (218-5008), boom cylinder hydraulics | |
| D25567 | ELBOW | - lower port of boom cylinder, hydraulics | |
| NSS | NOT SOLD SEPARAT | "O" ring seal, D25567 elbow (218-5007), boom cylinder hydraulics | |
| D25597 | | VALVE - flow control (Used with boom cylinders with 1-3/4" dia. piston rods) See Figure 109 for breakdown (See D27564), hydraulics | |
| NSS | NOT SOLD SEPARAT | 3/4" NPT x 3/4" JIC connector (218-446), boom cylinder hydraulics | |
| D25816 | X | HOSE - upper valve port to bulkhead (1/2" I.D. x 7/8" O.D. x 17-1/4" long) Use D29153, boom cylinder hydraulics | |
| NSS | NOT SOLD SEPARAT | "O" ring seal, D25816 hose (218-5008), boom cylinder hydraulics | |
| D25828 | | NUT - jam, hoses at bulkhead (7/8" - 14 NF) Use 50875, boom cylinder hydraulics | |
| D26306 | TUBE - flow control valve to upper port of boom cylinder, hydraulics | | |
| D27156 | CYLINDER ASSY. | CYLINDER - boom, hydraulic (With tie rods - 2" dia. piston rod) When stock is exhausted use D27751 cylinder, D29020 tube, and 218-5065 connector (See Figure 098 for breakdown) | |
| D27564 | | VALVE - flow control (Used with boom cylinders with 2" dia. piston rods) See Figure 109 for breakdown (See D25597), hydraulics | |
| D27751 | CYLINDER ASSY. | CYLINDER - boom, hydraulic (Without tie rods) When replacing D25027 or D27156 cylinders also order 1-218-5065 connector and 1-D29020 tube (See Figure 099 for breakdown) | |
| NSS | NOT SOLD SEPARAT | 3/4" JIC x 5/8" JIC connector (218-5065), boom cylinder hydraulics | |
| D29153 | HOSE ASSY. | HOSE - upper valve port to bulkhead (1/2" I.D. x 31/32" O.D. x 17-1/2" long), boom cylinder hydraulics | |
| NSS | NOT SOLD SEPARAT | "O" ring seal, D29153 hose (218-5008), boom cylinder hydraulics | |
| D29155 | HOSE ASSY. | HOSE - lower valve port to bulkhead (1/2" I.D. x 31/32" O.D. x 20-1/4" long), boom cylinder hydraulics | |
| NSS | NOT SOLD SEPARAT | "O" ring seal, D29155 hose (218-5008), boom cylinder hydraulics | |
| D29020 | TUBE | - to upper port of D27751 boom cylinder, hydraulics | |
| 49789 | CLAMP | - tube, used with 1/4" attaching bolt (See D30604), crowd cylinder hydraulics | |
| NSS | NOT SOLD SEPARAT | 1/4" - 20 NC x 1-1/4" hex. head cap screw (13-420) Used before backhoe serial no. 4043460, crowd cylinder hydraulics | |
| NSS | NOT SOLD SEPARAT | 1/4" - 20 NC x 3/4" hex. head cap screw (13-412) Used with 49789 clamp on backhoe serial no. 4043460 and after, crowd cylinder hydraulics | |
| NSS | NOT SOLD SEPARAT | 1/4" lockwasher (92-4), crowd cylinder hydraulics | |
| NSS | NOT SOLD SEPARAT | 1/4" - 20 NC hex. nut (25-104) Used before backhoe serial no. 4043460, crowd cylinder hydraulics | |
| D20045 | PLATE ASSY. | CLAMP - hose, crowd cylinder hydraulics | |
| NSS | NOT SOLD SEPARAT | 5/16" - 18 NC x 2-1/4" hex. head cap screw (13-536), crowd cylinder hydraulics | |
| NSS | NOT SOLD SEPARAT | 5/16" lockwasher (92-5), crowd cylinder hydraulics | |
| NSS | NOT SOLD SEPARAT | 5/16" hex. nut (25-105), crowd cylinder hydraulics | |
| D24071 | | TUBE - hose to crowd cylinder hydraulics | |
| D24347 | HOSE ASSY. | HOSE - bulkhead to tube (1/2" I.D. x 7/8" O.D. x 33" long), crowd cylinder hydraulics | |
| D24349 | HOSE ASSY. | HOSE - tube to cylinder (3/4" I.D. x 1-5/32" O.D. x 23" long), crowd, hydraulics | |
| D24660 | TUBE - hose to upper port crowd cylinder, before backhoe serial no. 4041576 (Use D26381 tube and 218-446 connector), hydraulics | | |
| D25012 | | CYLINDER - crowd, hydraulic (With tie rods - 1" - 14 NF nut on piston rod) Use D27489 cylinder until stock is exhausted then use D27752 cylinder, D29026 tube, and 218-5065 connector) (See Figure 100 for breakdown) | |
| D25086 | | SPACER - tube mounting (Used before backhoe serial no. 4043460), crowd cylinder hydraulics | |
| D25089 | X | HOSE - upper valve port to bulkhead (1/2" I.D. x 7/8" O.D. x 18-3/4" long) Use D29154, crowd cylinder hydraulics | |
| NSS | NOT SOLD SEPARAT | "O" ring seal, D25089 hose (218-5008), crowd cylinder hydraulics | |
| D25090 | X | HOSE - lower valve port to bulkhead (1/2" I.D. x 7/8" O.D. x 20-1/4" long) Use D29155, crowd cylinder hydraulics | |
| D25567 | ELBOW | - 90 degrees adjustable, lower port crowd cylinder hydraulics | |
| NSS | NOT SOLD SEPARAT | "O" ring seal, D25567 elbow (218-5007), crowd cylinder hydraulics | |
| D26348 | | CLAMP - hose, crowd cylinder hydraulics | |
| NSS | NOT SOLD SEPARAT | 1/2" - 13 NC x 1" hex. head cap screw (13-816), crowd cylinder hydraulics | |
| NSS | NOT SOLD SEPARAT | 1/2" lockwasher (92-8), crowd cylinder hydraulics | |
| NSS | NOT SOLD SEPARAT | 1/2" standard wrot washer (95-8), crowd cylinder hydraulics | |
| D26381 | | TUBE - hose to upper port of crowd cylinder (Backhoe serial no. 4041576 and after), hydraulics | |
| NSS | NOT SOLD SEPARAT | 3/4" JIC x 3/4" NPT connector (218-446), crowd cylinder hydraulics | |
| D27489 | | CYLINDER - crowd, hydraulic (With tie rods, 1-1/4" - 12 NF nut on piston rod) When stock is exhausted use D27752 cylinder, D29026 tube, and 218-5065 connector (See Figure 102 for breakdown) | |
| D27752 | CYLINDER ASSY. | CYLINDER - crowd, hydraulic (Without tie rods) When replacing D25012 or D27489 cylinder with tie rods also order 1-D29026 tube and 1-218-5065 connector (See Figure 103 for breakdown) | |
| D29026 | TUBE | - to upper port of D27752 crowd cylinder hydraulics | |
| D29154 | HOSE ASSY. | HOSE - upper valve port to bulkhead (1/2" I.D. x 31/32" O.D. x 18-3/4" long), crowd cylinder hydraulics | |
| NSS | NOT SOLD SEPARAT | "O" ring seal, D29154 hose (218-5008), crowd cylinder hydraulics | |
| D29155 | HOSE ASSY. | HOSE - lower valve port to bulkhead (1/2" I.D. x 31/32" O.D. x 20-1/4" long), crowd cylinder hydraulics | |
| NSS | NOT SOLD SEPARAT | "O" ring seal, D29155 hose (218-5008), crowd cylinder hydraulics | |
| D30604 | CLAMP | - tube, used with 3/8" attaching bolt (See 49789), crowd cylinder hydraulics | |
| NSS | NOT SOLD SEPARAT | 3/8" - 16 NC x 1" hex. head cap screw (13-616), crowd cylinder hydraulics | |
| NSS | NOT SOLD SEPARAT | 3/8" lockwasher (92-6), crowd cylinder hydraulics | |
| 32978 | PLATE ASSY. | CLAMP - tube, bucket cylinder hydraulics | |
| NSS | NOT SOLD SEPARAT | 5/16" - 18 NC x 1-1/2" hex. head cap screw (13-524), bucket cylinder hydraulics | |
| NSS | NOT SOLD SEPARAT | 5/16" - 18 NC x 1-3/4" hex. head cap screw (13-528), bucket cylinder hydraulics | |
| NSS | NOT SOLD SEPARAT | 5/16" lockwasher (92-5), bucket cylinder hydraulics | |
| NSS | NOT SOLD SEPARAT | 5/16" - 18 NC hex. nut (25-105), bucket cylinder hydraulics | |
| D20045 | PLATE ASSY. | CLAMP - tube, bucket cylinder hydraulics | |
| NSS | NOT SOLD SEPARAT | 5/16" - 18 NC x 1-3/4" hex. head cap screw (13-528), bucket cylinder hydraulics | |
| NSS | NOT SOLD SEPARAT | 5/16" lockwasher (92-5), bucket cylinder hydraulics | |
| NSS | NOT SOLD SEPARAT | 5/16" hex. nut (25-105), bucket cylinder hydraulics | |
| D24065 | | TUBE - bulkhead hose to L.H. boom elbow, bucket cylinder hydraulics | |
| D24066 | | TUBE - bulkhead hose to R.H. boom elbow, bucket cylinder hydraulics | |
| D24076 | | TUBE - hose to lower port of bucket cylinder (Use D28703 for cylinders with tie rods and D29022 for cylinders without tie rods), hydraulics | |
| NSS | NOT SOLD SEPARAT | 3/4" NPT x 3/4" JIC connector (218-446), bucket cylinder hydraulics | |
| D24077 | X | TUBE - hose to upper port of bucket cylinder (Use D28701), hydraulics | |
| D24079 | X | HOSE - elbow to tube (3/4" I.D. x 1-5/32" O.D. x 37" long) Used with D24076 (40-3/16") and D24077 (10-1/4") tubes (See D28705), bucket cylinder hydraulics | |
| D24345 | HOSE ASSY. | HOSE - bulkhead to tube (1/2" I.D. x 7/8" O.D. x 31" long), bucket cylinder hydraulics | |
| D25045 | CYLINDER - bucket, hydraulic (With tie rods) When stock is exhausted use D27753 cylinder, D29022 tube, and 218-5065 connector (See Figure 104 for breakdwon) | | |
| D25089 | X | HOSE - control valve to bulkhead (1/2" I.D. x 7/8" O.D. x 18-3/4" long) Use D29154, bucket cylinder hydraulics | |
| NSS | NOT SOLD SEPARAT | "O" ring seal, D25089 hose (218-5008), bucket cylinder hydraulics | |
| D25566 | ELBOW | - 90 degrees adjustable, upper port of bucket cylinder hydraulics | |
| NSS | NOT SOLD SEPARAT | "O" ring seal, D25566 elbow (218-5007), bucket cylinder hydraulics | |
| D25568 | ELBOW UNION | ELBOW - 90 degrees special, bucket cylinder hydraulics | |
| D25585 | | PLATE - spacer, bucket cylinder hydraulics | |
| NSS | NOT SOLD SEPARAT | 3/8" - 16 NC x 1" hex. head cap screw (13-616), bucket cylinder hydraulics | |
| NSS | NOT SOLD SEPARAT | 3/8" lockwasher (92-6), bucket cylinder hydraulics | |
| D26231 | NUT | - jam, D25585 elbow (1-1/16" - 12 NF), bucket cylinder hydraulics | |
| D27753 | CYLINDER ASSY. | CYLINDER - bucket, hydraulic (Without tie rods) When replacing D25045 cylinder with tie rods also order 1-218-5065 connector and 1-D29026 tube (See page 106 for breakdown) | |
| D28701 | TUBE | - hose to upper port of bucket cylinder hydraulics | |
| D28703 | TUBE | - hose to lower port of bucket cylinder (Used with D25045 cylinder) See D29022, hydraulics | |
| D28705 | HOSE | - elbow on boom to bucket cylinder tubes (3/4" I.D. x 1-5/32" O.D. x 40" long) Used with D28701 (11-1/4") and D28703 (43-9/16") tubes (See D24079), hydraulics | |
| D29022 | TUBE | - hose to lower port of bucket cylinder (Used with D27753 bucket cylinder) See D28703, hydraulics | |
| D29154 | HOSE ASSY. | HOSE - control valve to bulkhead (1/2" I.D. x 31/32" O.D. x 18-3/4" long), bucket cylinder hydraulics | |
| NSS | NOT SOLD SEPARAT | "O" ring seal, D29154 hose (218-5008), bucket cylinder hydraulics | |
