№ | Номер | Название | Опции | Альт |
1 | REF | INSTRUCTION | AIR COMPRESSOR - water cooled, single cylinder, parts list Figures 7-20 or 7-22, no longer available, order L112909 compressor on Figure 7-08, parts list Figure 7-24, and L36281 kit on Figure 7-08 | | 2 | L57805 | PULLEY | - drive, compressor | | 3 | 13-720 | BOLT,Hex, 7/16" - 14 x 1-1/4", Gr 5, Full Thd | | | 4 | 92-7 | LOCK WASHER,7/16" | | | 5 | M20458 | SEALANT | - 16 oz (473 ml) brushtop can, not shown | | 6 | L100499 | BASE | PLATE - mounting, compressor | | 7 | 413-820 | BOLT,Hex, 1/2" - 13 x 1-1/4", Gr 5 | - hex, 1/2 NC x 1-1/4 inch | | 8 | 92-8 | LOCK WASHER,1/2" | | | 9 | D64050 | WASHER | - flat, hardened | | | 222-82 | TEE,1/2"-12 Male x 1/8 NPT Fem Run x 1/8 NPT Br | - compression fitting, Includes: Ref. 10 - 12 | | 10 | NSS | NOT SOLD SEPARAT | BODY - fitting | | 11 | 222-102 | SLEEVE,1/4" Tube | | | 12 | 87017024 | TUBE NUT,1/2"-24 | NUT - fitting | | 13 | 221-1411 | ELBOW,90 Degree, 1/8"-27, NPT | STREET ELBOW - 90 degree, 1/8" NPT | | 14 | L112994 | HOSE,0.50" ID x 32.00" | | | 15 | 218-442 | HYD CONNECTOR,1/2" - 20 Male JIC x 1/8" - 27 Male NPTF | ADAPTER - male, straight | | 16 | 217-152 | FITTING,1/2" Hose Barb x 3/8" Male NPTF | stem, straight 1/2" Hose X 3/8" NPTF Beaded | | 17 | 214-252 | HOSE CLAMP,#08, 0.5" - 0.91", Type F Worm | CLAMP - hose | | 18 | L41213 | HOSE | - 1/2" (12 mm) ID x 28" (711 mm) long, lubrication, cut from S118466 hose, see below | | 19 | 217-186 | FITTING,45 Degree Elbow, 1/2" Hose Barb x 1/2" Male NPTF | STEM FITTING - 45 degree | | 20 | R21385 | CLAMP | - hose | | 21 | 13-616 | BOLT,Hex, 3/8" - 16 x 1", Gr 5, Full Thd | | | 22 | 92-6 | LOCK WASHER,3/8" | | | 23 | 25-106 | NUT,3/8"-16, G5 | - hex, 3/8" - 16 NC | | 24 | 218-1056 | ELBOW,90 Degree, 3/4"-16, 37 Degree x 3/4"-16, NPTF | - 90 degree | | 25 | L100556 | HOSE,0.25" ID x 17.00" | | | 26 | G45437 | LOCK VALVE | CHECK VALVE - air pressure, parts list Figure 7-32 | | 27 | 221-1414 | ELBOW,90 Degree, 1/2"-14, NPT | STREET ELBOW - 90 degree, 1/2" NPT | | 28 | REF | INSTRUCTION | RESERVOIR - air, brake system, see Figure 7-36, item1 | | 29 | L47886 | HOSE | - 27" (686 mm) long | | 30 | L48131 | FITTING | TEE - special | | 31 | L48992 | VALVE,1/4" | - safety | | | S118466 | HOSE,0.50" ID x 300.00" | - Fuel line 0.50" ID x 300.00" | | 32 | 221-1030 | SPARE PART,Sq Hd, 3/8"-18 NPTF | REDUCER - 3/4" x 1/2" NPT | | 33 | 217-153 | FITTING,5/8" Hose Barb x 1/2" Male NPTF | STEM FITTING - straight | | 34 | 214-253 | HOSE CLAMP,#10, 0.56" - 1.06", Type F Worm | CLAMP - hose | | 35 | L47888 | HOSE | - 5/8" (16 mm) ID x 37" (940 mm) long, used without turbocharger | | 36 | REF | INSTRUCTION | HOSE - 5/8" (16 mm) ID x 28" (737 mm) long, used with turbocharger, order L47888 item 35 and cut to 28" length | | 37 | REF | INSTRUCTION | ADAPTER - air cleaner to intake manifold, see Figure 2-46, item 10 | | 38 | REF | INSTRUCTION | HOSE - 5/8" (16 mm) ID x 18" (450 mm) long, cut from A42610 hose, see below | | 39 | 217-134 | ELBOW,90 Degree Elbow, 5/8" Hose Barb x 1/2" Male NPTF | STEM FITTING - 90 degree | | 40 | REF | INSTRUCTION | HOSE - 5/8" (16 mm) ID x 16" (406 mm) long, cut from A42610 hose, see below | | 41 | L18337 | CABLE TIE,9.95"-12.1" lg | STRAP - tie, 15 inch, nylon | | | A42610 | LARGE HOSE | HOSE - bulk roll, 5/8" (16 mm) ID x 50 ft. (15.2 m) | |
|
|