(364) - MOUNTING FRAME AND STABILIZERS, CASE-CESSNA VALVES

№	Номер	Название	Опции
1	D56209		FRAME - backhoe mounting, Includes: Ref. 2 - 5
2	D31142	BUSHING,51.02mm ID x 63.5mm OD x 38.1mm L	- frame at swing tower
3	D46942	BEARING,1.75" ID x 2.8125" OD x 1.526"	BUSHING - pivotal ball type, stabilizer anchor
4	F61018	SNAP RING,M73, Int	Ring, Snap, , bushing 2.812", Int, #281
5	D43940	BUSHING,44.68mm ID x 57.15mm OD x 25.4mm L	- standard, stabilizer anchor
6	D50292	SUPPORT ASSY.	LEG - stabilizer, RH, Includes: Ref. 8, 9 and 10
7	D50293	SUPPORT ASSY.	LEG - stabilizer, LH, Includes: Ref. 8, 9 and 10, not shown
8	D37495	BUSHING,44.76mm ID x 57.15mm OD x 31.75mm L	- leg to frame, 1-1/4" (31 mm) long
9	D54013	SPACER,50.7mm ID x 53.98mm OD x 140.72mm L	SPACER - bushing
10	D37443	BUSHING,44.68mm ID x 57.15mm OD x 50.8mm L	- leg to frame, 2" (51 mm) long
11	D52039	PIN	- stabilizer, Serial Range: leg-frame
12	D57735	PIN	BOLT - special, pin retaining
13	D57734	AXLE PIN	PIN - cotter, hair pin type
14	D29483	PIN,38.1mm OD x 146.05mm L	- stabilizer cylinder
14a	219-1	LUBE NIPPLE,1/8" - 27 NPTF	GREASE FITTING - straight, 1/8" NPT
15	D50337	BUSHING,38.91mm ID x 44.45mm OD x 14.22mm L	SPACER - cylinder mounting
16	D25279	SNAP RING,M35, Int	RING - retaining, pin
17	REF	INSTRUCTION	CYLINDER - LH stabilizer, see Figures 252 - 268, not shown
18	REF	INSTRUCTION	CYLINDER - RH stabilizer, see Figures 252 - 268
19	D25279	SNAP RING,M35, Int	RING - retaining, pin
20	D50695	PIN,38.1mm OD x 195.33mm L	- stabilizing, Serial Range: cylinder-leg
21	D25279	SNAP RING,M35, Int	RING - retaining, pin
22	D50696	PIN,38.1mm OD x 225.55mm L	- stabilizer, Serial Range: foot-leg
23	D55473	PAD	FOOT - stabilizer, cleated, when stock is exhausted, order D64621 foot for service
23	D64621	FOOT REST	FOOT - stabilizer, cleated
24	D50143		FOOT - stabilizer, street or cemetary pad, optional, when stock is exhaustd use D40469 pad
24	D55478	FOOT	- stabilizer, street or cemetary pad, optional, uses D40469 pad
24a	D61376	STABILIZER	FOOT - stabilizer, street or cemetary pad, optional, uses D61368 pad
25	R31222	SHOE	PAD - rubber, D55478 stabilizer foot, optional
26	D29712	SPECIAL NUT	- hex, special, used with D40469 rubber pad only
26a	D61368	PAD	Rubber, D61376 stabilizer foot, optional
26b	13-1228	BOLT,Hex, 3/4" - 10 x 1-3/4", Gr 5
26c	25-1012	NUT,3/4"-10, G5
27	D54022	DOOR	COVER - access
28	13-616	BOLT,Hex, 3/8" - 16 x 1", Gr 5, Full Thd
29	92-6	LOCK WASHER,3/8"
30	219-39	FITTING	GREASE FITTING - 45 degree, 1/8" NPT, upper pins
30	219-1	LUBE NIPPLE,1/8" - 27 NPTF	GREASE FITTING - straight, 1/8" NPT, lower pins
31	13-828	BOLT,Hex, 1/2" - 13 x 1-3/4", Gr 5	- hex, 1/2" - 13 NC x 1-3/4"
32	92-8	LOCK WASHER,1/2"
33	D53647	PIVOT	PIN - swing, Serial Range: cylinder-frame
34	REF	INSTRUCTION	CYLINDER - hydraulic, swing, parts list Figures 272 - 288
35	D49863	PIN,44.45mm OD x 248.92mm L	- swing, Serial Range: cylinder-tower
36	D49864	PLATE	- pin retaining
37	13-820	BOLT,Hex, 1/2" - 13 x 1-1/4", Gr 5, Full Thd
38	92-8	LOCK WASHER,1/2"
39	D50134	LATHE	TOWER - swing, Includes: Ref. 40
40	D49429	BUSHING	- at boom cylinder, closed end
41	D49879	PIN	- swing locking
42	D33805	PIN	- klik
43	D74004	PIN	- tower to frame, upper
44	D74004	PIN	- tower to frame, lower
45	D26919	SNAP RING,#200, Ext	Ring, Snap, #200, Ext
46	219-1	LUBE NIPPLE,1/8" - 27 NPTF	GREASE FITTING - straight, 1/8" NPT
47	D56335	PIN	- tractor to backhoe mounting frame
48	13-856	BOLT,Hex, 1/2" - 13 x 3-1/2", Gr 5
49	131-654	LOCK NUT,1/2"-13, GB	NUT - hex, lock, 1/2" - 13 NC
50	D50132	SPACER,57.15mm ID x 114.3mm OD x 7.94mm L	- bearing