| № | Номер | Название | Опции | Альт |
|---|
| 1 | D37423 | LEVER | TOWER - backhoe swing, Includes: Ref. 2 and 3 | |
| 2 | D30756 | BUSHING,51.02mm ID x 63.5mm OD x 31.8mm L | - tower at mounting frame | |
| 3 | D38478 | BUSHING | - tower at boom cylinder | |
| 4 | D37451 | PIN | BOLT - mounting, swing tower | |
| 5 | D26991 | BEARING | SPACER - bearing | |
| 6 | D36478 | WASHER | - special | |
| 7 | 25-1324 | SLOTTED NUT,1 1/2"-12, G5 | NUT - hex., slotted (1-1/2" - 12 NF) | |
| 8 | 132-154 | COTTER PIN,1/4" x 2" | Pin, Split (Cotter), 1/4" x 2" | |
| 9 | D26919 | SNAP RING,#200, Ext | Ring, Snap, , pin #200, Ext | |
| 10 | 195-2155 | WASHER,2 1/16" x 3" x .109" | - flat, steel (2-1/16") | |
| 11 | D33637 | PIN | - tower to mounting frame | |
| 12 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight (1/8" NPT) | |
| 13 | D32337 | PIN | - pivot, Serial Range: tower-boom | |
| 14 | D32338 | WASHER | - pin | |
| 15 | 129-297 | NUT | - hex., slotted (1-1/4" - 7 NC) | |
| 16 | 132-157 | COTTER PIN,Ext Prong Sq Cut, 1/4" x 2 1/2" | Pin, Split (Cotter), 1/4" x 2 1/2" | |
| 16a | D41161 | BLOCK - tapped (Used on boom before backhoe serial no. 4141636) | | |
| 17 | D37414 | | BOOM - backhoe hose routed through boom casting (When replacing boom before backhoe serial no. 4141636, order 2 - D41161 tapped blocks), Includes: Ref. 18 - 19 | |
| 17 | D44362 | BOOM | - (Used on backhoe serial no. 4141636 and after), Includes: Ref. 18 - 19 | |
| 18 | D40466 | BUSHING | - at swing tower and dipper arm (When stock is exhausted, replace with 2 - D44648 bushings and 1 - D37416 spacer) | |
| 18a | D44648 | BUSHING | - swing tower and dipper arm | |
| 18b | D37416 | BUSHING | SPACER - bushing, at boom castings | |
| 19 | D38478 | BUSHING | - cylinder brackets | |
| 20 | 13-612 | BOLT,Hex, 3/8" - 16 x 3/4", Gr 5, Full Thd | If used Hex, 3/8"-16 x 3/4", G5, Full Thd | |
| 21 | 92-6 | LOCK WASHER,3/8" | if used 3/8" | |
| 22 | D37328 | COVER | - hose guard (If used) | |
| 23 | D25280 | SNAP RING,#175, Ext | Ring, Snap, , pin #175, Ext | |
| 24 | 195-2156 | WASHER,1 13/16" x 2 3/4" x .109" | - flat, steel (1-13/16") | |
| 25 | T28060 | WASHER | SPACER - cylinder | |
| 26 | D38480 | PIN | - boom cylinder mounting | |
| 27 | REF | INSTRUCTION | CYLINDER - hydraulic, boom (See Figure 304 thru 312 for proper cylinder) | |
| 28 | D25280 | SNAP RING,#175, Ext | Ring, Snap, , pin #175, Ext | |
| 29 | 195-2156 | WASHER,1 13/16" x 2 3/4" x .109" | - flat (1-13/16") | |
| 30 | T28060 | WASHER | SPACER - cylinder | |
| 31 | D38480 | PIN | - dipper cylinder mounting, at boom | |
| 32 | D38481 | PIN | - dipper cylinder, D37430 dipper arm | |
| D43959 | PIN | - dipper cylinder, D43956 dipper arm | |
| 33 | REF | INSTRUCTION | CYLINDER - hydraulic, dipper (See Figures 314 thru 318 for proper cylinder) | |
| 34 | D37430 | X | DIPPER ARM - backhoe, used before backhoe serial no. 4160773 (When stock is exhausted, order D43956 dipper, D43959 pin, D45034 pin and 2 - 195-2156 washers for service - parts list Figure 78), Includes: Ref. 35 - 39 | |
| 35 | D38479 | BUSHING | - at dipper cylinder, D37430 arm | |
| 36 | D30756 | BUSHING,51.02mm ID x 63.5mm OD x 31.8mm L | - at boom, D37430 arm | |
| 37 | D37392 | BUSHING,44.68mm ID x 53.98mm OD x 31.75mm L | - dipper arm, at bucket cylinder | |
| 38 | D30933 | BUSHING,38.41mm ID x 47.63mm OD x 31.75mm L | - dipper arm, at bucket link | |
| 39 | D37443 | BUSHING,44.68mm ID x 57.15mm OD x 50.8mm L | - dipper arm, at bucket | |
| 40 | D26919 | SNAP RING,#200, Ext | Ring, Snap, #200, Ext | |
| 41 | 195-2155 | WASHER,2 1/16" x 3" x .109" | - flat, steel (2-1/16") | |
| 42 | D37449 | SHIM,.0747" Thk | - 1/16" thick | |
| 43 | D37609 | PIN | - boom to dipper arm, D37430 arm | |
| 44 | D25280 | SNAP RING,#175, Ext | Ring, Snap, #175, Ext | |
| 45 | 195-2152 | WASHER,1 13/16" x 2 1/2" x .109" | - flat, steel (1-13/16") | |
| 46 | D37611 | PIVOT PIN,44.45mm OD x 255.59mm L | PIN - bucket cylinder to dipper arm | |
| 47 | REF | INSTRUCTION | CYLINDER - hydraulic, bucket (See Figures 320 thru 326 for proper cylinder) | |
| 48 | D25279 | SNAP RING,M35, Int | RING - retaining | |
| 49 | D28610 | WASHER,38.5mm ID x 63.5mm OD x 2.66mm Thk | - special | |
| 50 | D37612 | PIN,38.1mm OD x 222.25mm L | - bucket cylinder to bucket linkage and dipper arm | |
| 51 | D37445 | LINK | - bucket cylinder to dipper arm (R.H.), Includes: Ref. 52 and 53 | |
| 52 | D30933 | BUSHING,38.41mm ID x 47.63mm OD x 31.75mm L | - link, at bucket cylinder | |
| 53 | D32919 | BUSHING,38.4mm ID x 47.63mm OD x 19.05mm L | - link, at dipper arm | |
| 54 | D37444 | LINK | - bucket cylinder to dipper arm, L.H., Includes: Ref. 55 and 56 | |
| 55 | D30933 | BUSHING,38.41mm ID x 47.63mm OD x 31.75mm L | - link, at bucket cylinder | |
| 56 | D32919 | BUSHING,38.4mm ID x 47.63mm OD x 19.05mm L | - link, at dipper arm | |
| 57 | D29991 | X | LINK - bucket cylinder to bucket (Early production) When stock is exhausted, use 2 - D37452 links, 2 - D39261 spacers and 1 - D37450 spacer for service, Includes: Ref. 58 | |
| 58 | D30929 | BUSHING,38.33mm ID x 47.63mm OD x 38.1mm L | - link | |
| 59 | D37452 | LINK | - bucket cylinder to bucket (Late production), Includes: Ref. 60 | |
| 60 | D30933 | BUSHING,38.41mm ID x 47.63mm OD x 31.75mm L | - link | |
| 61 | D39261 | WASHER | SPACER - link, at bucket cylinder | |
| 62 | D37450 | SPACER,40.89mm ID x 48.26mm OD x 63.5mm L | SPACER - link, at bucket | |
| 63 | D25279 | SNAP RING,M35, Int | RING - retaining | |
| 64 | D28610 | WASHER,38.5mm ID x 63.5mm OD x 2.66mm Thk | - special, 1/8" thick | |
| 65 | D37614 | PIN,38mm Od x 246mm L | - bucket link to bucket (Used on all buckets except heavy duty) | |
| 65 | D30899 | PIVOT PIN,38.1mm OD x 338.14mm L | PIN - bucket link (Heavy duty bucket only) | |
| 66 | D25280 | SNAP RING,#175, Ext | Ring, Snap, #175, Ext | |
| 67 | 195-2152 | WASHER,1 13/16" x 2 1/2" x .109" | - flat, steel (1-13/16") | |
| 68 | D37613 | PIN | - bucket to dipper arm (See D40244 pin) | |
| D40244 | PIN,44.45mm OD x 327.02mm L | - bucket to dipper arm (Used with D37472 and D41547 12" buckets only) | |
| 69 | REF | INSTRUCTION | BUCKET - backhoe (See Figures 98 thru 104 for options) | |
| 70 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight (1/8" NPT) | |
| 71 | 219-55 | LUBE NIPPLE,90 Degree Elbow, 1/8" - 27 NPTF | NIPPLE, LUBE, 90º, 1/8" NPT x .84" lg | |
| D42577 | SPARE PART | FROST POINT ASSEMBLY - backhoe, Includes: Ref. 72 - 74 | |
| 72 | NSS | NOT SOLD SEPARAT | BODY - frost point | |
| 73 | D43416 | POINT | - tooth | |
| 74 | D43417 | PIN | FLEX PIN - point | |
