(078) - TOWER, BOOM, DIPPER ARM AND BUCKET, BOOM AND DIPPER ARM WITH FABRICATED CYL. ANCHORS

№	Номер	Название	Опции
1	D45031		TOWER - backhoe swing, Includes: Ref. 2 and 3
2	D30756	BUSHING,51.02mm ID x 63.5mm OD x 31.8mm L	- tower at mounting frame
3	D38478	BUSHING	- tower at boom cylinder
4	D44733	PIN	- mounting frame to swing tower, lower
5	D44813	SHIM,53.34mm ID x 76.2mm OD x 0.89mm Thk	Tower .035" Thk
6	D33637	PIN	- mounting frame to swing tower, upper
7	195-2155	WASHER,2 1/16" x 3" x .109"	- flat (2-1/16")
8	D26919	SNAP RING,#200, Ext	Ring, Snap, #200, Ext
9	219-1	LUBE NIPPLE,1/8" - 27 NPTF	FITTING - grease, straight (1/8" NPT)
10	D44888	PIN	- boom to swing tower
11	D49182	WASHER	- special
12	D26919	SNAP RING,#200, Ext	Ring, Snap, #200, Ext
13	219-55	LUBE NIPPLE,90 Degree Elbow, 1/8" - 27 NPTF	NIPPLE, LUBE, 90º, 1/8" NPT x .84" lg
14	D44956		BOOM - backhoe (Used before backhoe SN. 4176351 on all models except those featuring hydraulic extendable dippers) When stock is exhausted, order D50776 and D52755 tubes, parts list Figure 146 and D50775 boom for service, Includes: Ref. 15 - 16
14	D50775	BOOM	- backhoe (Used w/all hydraulic extendable dippers and on backhoe SN. 4176351 & after as production item; prior to 4176351 w/D50776 and D52755 tubes as service replacement) When stock is exhausted, order D55016 as service replacement, Inc. 15 - 16
14	D55016	LINKAGE	BOOM - backhoe (Must also order 2 - D38480 pins and 4 - 195-2156 washers. See ref. nos. 54 and 55), Includes: Ref. 15 - 16
15	D44648	BUSHING	- upper and lower
15a	D37416	BUSHING	SPACER - bushing, at boom castings
16	D43940	BUSHING,44.68mm ID x 57.15mm OD x 25.4mm L	- cylinder mountings
17	D45034	PIN	- boom to dipper arm
18	195-2155	WASHER,2 1/16" x 3" x .109"	- flat (2-1/16")
19	219-55	LUBE NIPPLE,90 Degree Elbow, 1/8" - 27 NPTF	NIPPLE, LUBE, 90º, 1/8" NPT x .84" lg
20	D26919	SNAP RING,#200, Ext	Ring, Snap, #200, Ext
21	D43956	BALANCER	DIPPER ARM - backhoe, Includes: Ref. 22 - 24B
22	D43946	BUSHING,51.02mm ID x 63.5mm OD x 35.6mm L	- dipper, at boom
23	D37392	BUSHING,44.68mm ID x 53.98mm OD x 31.75mm L	- dipper, at bucket cylinder
24	D43940	BUSHING,44.68mm ID x 57.15mm OD x 25.4mm L	- dipper, at dipper cylinder
24a	D37443	BUSHING,44.68mm ID x 57.15mm OD x 50.8mm L	- dipper at bucket
24b	D30933	BUSHING,38.41mm ID x 47.63mm OD x 31.75mm L	- dipper at bucket links
25	219-1	LUBE NIPPLE,1/8" - 27 NPTF	FITTING - grease, straight (1/8" NPT)
26	D37612	PIN,38.1mm OD x 222.25mm L	- bucket linkage to dipper arm
27	D28610	WASHER,38.5mm ID x 63.5mm OD x 2.66mm Thk	- special
28	D25279	SNAP RING,M35, Int	RING - snap
29	D37445	LINK	- bucket cylinder to dipper arm (R.H.)
30	D37444	LINK	- bucket cylinder to dipper arm (L.H.), Includes: Ref. 31 and 32
31	D30933	BUSHING,38.41mm ID x 47.63mm OD x 31.75mm L	- link, at bucket cylinder
32	D32919	BUSHING,38.4mm ID x 47.63mm OD x 19.05mm L	- link, at dipper arm
33	D37452	LINK	- bucket cylinder to bucket, Includes: Ref. 34
34	D30933	BUSHING,38.41mm ID x 47.63mm OD x 31.75mm L	- link
35	D37613	PIN	- bucket to dipper arm
36	D40244	PIN,44.45mm OD x 327.02mm L	- bucket to dipper arm (D37472 and D41547 bucket only)
37	195-2152	WASHER,1 13/16" x 2 1/2" x .109"	- flat (1-3/4")
38	D25280	SNAP RING,#175, Ext	Ring, Snap, #175, Ext
39	D37614	PIN,38mm Od x 246mm L	- link to bucket (Used on all buckets except heavy duty)
39	D30899	PIVOT PIN,38.1mm OD x 338.14mm L	PIN - link to bucket (Heavy duty bucket only)
39	D37793	PIN	- link to frost point (Frost point only)
40	D37450	SPACER,40.89mm ID x 48.26mm OD x 63.5mm L	SPACER - link
41	D28610	WASHER,38.5mm ID x 63.5mm OD x 2.66mm Thk	- flat (1-3/64")
42	D25279	SNAP RING,M35, Int	RING - snap
43	REF	INSTRUCTION	BUCKET - backhoe (See Figures 98 thru 104 for options)
	D42577	SPARE PART	FROST POINT ASSEMBLY - backhoe, Includes: Ref. 44 - 46
44	NSS	NOT SOLD SEPARAT	BODY - frost point
45	D43416	POINT	- tooth
46	D43417	PIN	FLEX PIN - point
47	R10830	WASHER	- special (1/16" thick)
48	51200255	SEALING WASHER,45.77mm ID x 62.18mm OD x 1.59mm Thk	- special (1/16" thick)
49	D38480	PIN	- boom cylinder mounting at swing tower
50	195-2156	WASHER,1 13/16" x 2 3/4" x .109"	- flat (1-13/16")
51		RESERVED
52	D25280	SNAP RING,#175, Ext	Ring, Snap, #175, Ext
53	REF	INSTRUCTION	CYLINDER - hydraulic, boom (See Figures 304 thru 312 for proper cylinder)
54	D45047	PIN	- boom and dipper cylinder to boom (Used with D44956 and D50775 booms only)
54	D38480	PIN	- boom and dipper cylinder to boom (Used with D55016 service replacement boom only)
55	195-2156	WASHER,1 13/16" x 2 3/4" x .109"	- flat (1-13/16")
56	D25280	SNAP RING,#175, Ext	Ring, Snap, #175, Ext
57	REF	INSTRUCTION	CYLINDER - hydraulic, dipper (See Figures 314 and 318 for proper cylinder)
58	D43959	PIN	- dipper cylinder to dipper arm
59	195-2156	WASHER,1 13/16" x 2 3/4" x .109"	- flat (1-13/16")
60	D25280	SNAP RING,#175, Ext	Ring, Snap, #175, Ext
61	D37611	PIVOT PIN,44.45mm OD x 255.59mm L	PIN - bucket cylinder to dipper arm
62	195-2152	WASHER,1 13/16" x 2 1/2" x .109"	- flat (1-3/4")
63	D25280	SNAP RING,#175, Ext	Ring, Snap, #175, Ext
64	REF	INSTRUCTION	CYLINDER - hydraulic, bucket (See Figures 320 thru 326 for proper cylinder)
65	D37612	PIN,38.1mm OD x 222.25mm L	- bucket, Serial Range: cylinder-linkage
66	195-63	WASHER,1 5/8" x 3 1/4" x .180"	SPACER - bucket cylinder
67	D28610	WASHER,38.5mm ID x 63.5mm OD x 2.66mm Thk	- special
68	D25279	SNAP RING,M35, Int	RING - snap
69	D31312	WASHER	- special (1/16" thick)