| № | Номер | Название | Опции | Альт |
|---|
| 1 | D30748 | LATHE | TOWER - swing, Includes: Ref. 2 and 3 | |
| 2 | D33047 | BUSHING,44.68mm ID x 53.98mm OD x 22.23mm L | - at boom cyl. | |
| 3 | D30756 | BUSHING,51.02mm ID x 63.5mm OD x 31.8mm L | - at mtg. frame | |
| 4 | D30760 | STEP BOLT | BOLT - mounting (Special) | |
| 5 | 25-1324 | SLOTTED NUT,1 1/2"-12, G5 | NUT - slotted shear hex. (1-1/2" - 12 NF) | |
| 6 | 132-154 | COTTER PIN,1/4" x 2" | Pin, Split (Cotter), 1/4" x 2" | |
| 7 | D23907 | SPACER | - brg., 5/16" thick | |
| 8 | D26991 | BEARING | SPACER - brg., 1/4" thick | |
| 9 | D30763 | PIN | - at mtg. frame, upper | |
| 10 | D25509 | WASHER | - D30763 pin (2-1/64" I.D. x 3" O.D. x 7/64" thick) | |
| 11 | D26919 | SNAP RING,#200, Ext | Ring, Snap, , D30763 pin #200, Ext | |
| 12 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, str. (1/8" NPT) | |
| 13 | D30840 | BOOM - backhoe, Includes: Ref. 14 - 18 | | |
| 14 | 36121 | BUSHING | - at swing tower | |
| 15 | D33184 | SPACER | - 36121 bushings (If used) | |
| 16 | D25029 | BUSHING | - at crowd cyl. (When stock is exhausted, use D34109) | |
| D34109 | BUSHING | - at crowd cyl. | |
| 17 | 36121 | BUSHING | - at dipper arm | |
| 18 | D25258 | BUSHING | - at boom cyl. (When stock is exhausted, use D35071) | |
| D35071 | BUSHING | - at boom cyl. | |
| 19 | D30758 | PIN | - pivot, tower to boom (Used before backhoe serial no. 4082790) See D32337 | |
| 20 | 113-900 | BOLT,Locking, 1" - 8 x 2", Gr 5 | - nylock, self-locking (1" - 8 NC x 2") Used with D30758 pin | |
| 21 | D25991 | | WASHER - 113-900 bolt (1-1/32" I.D. x 2-1/2" O.D. x 1/2" thick) | |
| 22 | D32337 | PIN | - pivot, tower to boom (Used on backhoe serial no. 4082790 and after) | |
| 23 | D32338 | WASHER | - D32337 pin | |
| 24 | 25-2420 | X | NUT - castle (1-1/4" - 7 NC) | |
| 25 | 132-80 | HARDWARE | PIN - cotter (5/32" x 2-1/2") | |
| 26 | 219-40 | LUBE NIPPLE,65 Degree Elbow, 1/8" - 27 NPTF | FITTING - grease, 67-1/2 degrees (1/8" NPT) | |
| 27 | D23523 | PIN | - boom, Serial Range: cyl.-tower | |
| 28 | 195-2165 | WASHER,1 13/16" x 2 3/4" x .134" | - D23523 pin (1-13/16" I.D. x 2-3/4" O.D. x 9/64" thick) | |
| 29 | D25280 | SNAP RING,#175, Ext | Ring, Snap, , D23523 pin #175, Ext | |
| 30 | D27751 | CYLINDER ASSY. | CYLINDER - boom (Parts list Figure 138) Used before backhoe sn. 4101401 | |
| D35435 | CYLINDER | - boom (Parts list Figure 138) Used on backhoe sn. 4101401 and after | |
| 31 | D23522 | AXLE PIN | PIN - boom cyl. at boom | |
| 32 | 195-2165 | WASHER,1 13/16" x 2 3/4" x .134" | - D23522 pin (1-13/16" I.D. x 2-3/4" O.D. x 9/64" thick) | |
| 33 | D25280 | SNAP RING,#175, Ext | Ring, Snap, , D23522 pin #175, Ext | |
| 34 | D23521 | AXLE PIN | PIN - crowd cyl. at boom | |
| 35 | D25280 | SNAP RING,#175, Ext | Ring, Snap, , D23521 pin #175, Ext | |
| 36 | D27752 | CYLINDER ASSY. | CYLINDER - crowd (Parts list Figure 139A) | |
| 37 | D23441 | AXLE PIN | PIN - crowd cyl. at dipper arm | |
| 38 | D25280 | SNAP RING,#175, Ext | Ring, Snap, , D23441 pin #175, Ext | |
| 39 | D23517 | PIN | - boom to dipper arm | |
| 40 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, str. (1/8" NPT) | |
| 41 | D25509 | WASHER | - D23517 pin (2-1/64" I.D. x 3" O.D. x 7/64" thick) | |
| 42 | D26919 | SNAP RING,#200, Ext | Ring, Snap, , D23517 pin, Includes: Ref. 44 - 48 #200, Ext | |
| 43 | D30632 | ARM - dipper | | |
| 44 | D23203 | BUSHING | - at boom | |
| 45 | D25029 | BUSHING | - at crowd cyl. (When stock is exhausted use D34109) | |
| D34109 | BUSHING | - at crowd cyl. | |
| 46 | D25029 | BUSHING | - at bucket cyl. (When stock is exhausted use D34109) | |
| D34109 | BUSHING | - at bucket cyl. | |
| 47 | D31140 | BUSHING,38.33mm ID x 47.63mm OD x 25.4mm L | - at bucket linkage | |
| 48 | D31140 | BUSHING,38.33mm ID x 47.63mm OD x 25.4mm L | - at bucket | |
| 49 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, str. (1/8" NPT) | |
| 50 | D23441 | AXLE PIN | PIN - bucket cyl. at dipper arm | |
| 51 | D25280 | SNAP RING,#175, Ext | Ring, Snap, , D23441 pin #175, Ext | |
| 52 | D30769 | HYDRAULIC CYLINDER | CYLINDER - bucket (Parts list Figure 139C) | |
| 53 | D30759 | PIN | - bucket cyl. at link | |
| 54 | D30042 | WASHER | - D30759 pin (1-9/16" I.D. x 3" O.D. x 3/16" thick) | |
| 55 | D25279 | SNAP RING,M35, Int | - D30759 pin | |
| 56 | NLS | NO LONGER SERVICED | LINK - bucket, L.H., Includes: Ref. 58 and 59 | |
| 57 | D30755 | DRAG LINK | LINK - bucket, R.H., Includes: Ref. 58 and 59 | |
| 58 | D30930 | BUSHING,38.33mm ID x 47.63mm OD x 17.53mm L | - at cyl. | |
| 59 | D30932 | BUSHING,38.33mm ID x 47.63mm OD x 28.45mm L | - at dipper | |
| 60 | D30759 | PIN | - bucket link at dipper arm | |
| 61 | D25279 | SNAP RING,M35, Int | - D30759 pin | |
| 62 | D29991 | X | LINK - dump, bucket, Includes: Ref. 63 | |
| 63 | D30929 | BUSHING,38.33mm ID x 47.63mm OD x 38.1mm L | - dump link | |
| 64 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, str. (1/8" NPT), Includes: Ref. 65 | |
| 65 | D30898 | PIN | - dump link at bucket | |
| 66 | D25279 | SNAP RING,M35, Int | - D30898 pin | |
| 67 | D30899 | PIVOT PIN,38.1mm OD x 338.14mm L | PIN - bucket at dipper arm | |
| 68 | D25279 | SNAP RING,M35, Int | - 30899 pin | |
| 69 | REF | INSTRUCTION | BUCKET - backhoe (See figure 92) Machinery item | |
