| № | Номер | Название | Опции | Альт |
|---|
| 1 | D30996 | FRAME - loader, R.H. (Use before ldr. sn. 4110090) | | | | D36795 | | FRAME - loader, R.H. (Used on ldr. sn. 410090 and after) | | | 2 | D30997 | FRAME - loader, L.H. (Use before ldr. sn. 410090) | | | | D36937 | FRAME - loader, L.H. (Used on ldr. sn. 4110090 and after) | | | | 3 | 221-12 | PLUG,Sq Hd, 1/4"-18 | - pipe, sq. hd. (1/4" NPT) | | | 4 | 221-5 | DRAIN PLUG,Sq Hd, 1/4"-14 NPTF | PLUG - pipe, sq. hd (3/4" NPT) If used | | | 221-6 | X,Sq Hd, 1"-11 1/2 NPTF | PLUG - pipe, sq. hd. (1" NPT) If used | | | 5 | R14353 | CONNECTOR, ELEC | CONNECTOR - reservoir, 3/4" NPT x 1" O.D. tube (Used before ldr. sn. 4096200) | | | D33363 | FITTING | CONNECTOR - reservoir, 1" NPT x 1-1/4" O.D. tube (Used on ldr. sn. 4096200 and after) | | | 6 | D28486 | ELBOW - 90 degree street (3/4" NPT) Return line (Loader units only - for backhow models) If used | | | | D33590 | | ELBOW - 90 degree (3/4" NPT x 1" O.D. tube) Return line (Loader units only - for backhoe models) If used | | | 7 | 221-14 | DRAIN PLUG,Sq Hd, 1/2"-14 NPTF | PLUG - pipe (1/2" NPT) | | | 8 | 221-25 | PLUG,Sq Soc, 3/4"-14 NPTF | - pipe, sq. socket hd. (3/4" NPT) If used | | | 221-33 | OILER FABRIC,Sq Soc, 3/8"-18 NPTF | PLUG - pipe, sq. socket hd. (3/8" NPT) If used | | | 221-13 | PLUG,Sq Hd, 3/8"-18 | - pipe, sq. hd. (3/8" NPT) If used | | | 9 | 221-15 | PLUG,Sq Hd, 3/4"-14 | - pipe, sq. hd. (3/4" NPT) If used | | | 221-13 | PLUG,Sq Hd, 3/8"-18 | - pipe, sq. hd. (3/8" NPT) If used | | | 10 | 221-6 | X,Sq Hd, 1"-11 1/2 NPTF | PLUG - pipe, sq. hd. (1" NPT) If used | | | 221-12 | PLUG,Sq Hd, 1/4"-18 | - pipe, sq. hd. (1/4" NPT) If used | | | 11 | 221-62 | REDUCER,Hex, 1" x 1/4" NPT | BUSHING - pipe (1" NPT x 1/4" NPT) | | | 12 | 31543 | BREATHER | - reservoir | | | T14011 | ELEMENT | - breather | | | 13 | D31058 | GUARD - grille, gas models | | | | D31075 | GUARD - grille, diesel models | | | | 14 | 13-1236 | BOLT,Hex, 3/4" - 10 x 2-1/4", Gr 5 | | | | 15 | 131-16 | LOCK NUT,3/4"-10, GB | LOCKNUT, 3/4"-10, GB | | | 16 | 13-10116 | | HHCS - 5/8" - 11 NC x 7-1/4" (Use 113-639) Hex, 5/8"-11 x 7 1/4", G5 | | | 13-10128 | BOLT,Hex, 5/8" - 11 x 8", Gr 5 | (Use 113-639) Hex, 5/8"-11 x 8", G5 | | | 113-639 | BOLT | HHCS - 5/8" - 11 NC x 8" | | | 17 | 192-165 | LOCK WASHER,5/8" | WASHER, LOCK, 5/8" | | | 18 | 25-1010 | NUT,5/8"-11, G5 | Use 129-561 5/8"-11, G5 | | | 86625068 | NUT,5/8"-11, G8 | - hex. (5/8" - 11 NC) | | | 19 | D30995 | BRACKET - anchor, Serial Range: frame-floor | | | | 20 | 13-620 | BOLT,Hex, 3/8" - 16 x 1-1/4", Gr 5, Full Thd | | | | 21 | 92-6 | LOCK WASHER,3/8" | | | | 22 | 25-106 | NUT,3/8"-16, G5 | - hex., lock (3/8" - 16 NC) | | | 23 | 77-512 | SCREW | - truss hd., 5/16" - 18 NC x 3/4" | | | 24 | 92-5 | LOCK WASHER,5/16" | WASHER - med. sect. lock, 5/16" | | | 25 | 9635082 | NUT,5/16" - 18, Gr 5 | - hex. (5/16" - 18 NC) | | | 26 | D31389 | TUBE | - cross, subframe | | | 27 | D30992 | ROD | SHAFT - cross | | | 28 | D30934 | BUSHING | - spacer | | | 29 | F62199 | WASHER | SPACER - cross shaft | | | 30 | 131-363 | LOCK NUT,1 1/2"-6, GA | NUT - hex., lock (1-1/2" - 6 NC) | | | 31 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, str. (1/8" NPT) | | | 32 | D31463 | LIFT CYLINDER | CYLINDER - lift, R.H. (Parts list, Figure 66) | | | 33 | D31464 | CYLINDER | - lift, L.H. (Parts list, Figure 66) | | | 34 | D31225 | | CYLINDER - hydra-leveling (Parts list, Figure 70) Used before ldr. sn. 4110090 | | | D36882 | CYLINDER | - hydra-leveling (Parts list, Figure 70) Used on ldr. sn. 4110090 and after | | | 35 | D30993 | PIN | - pivot, cyl. to frame (Used before ldr. sn. 4080367) See D32265 | | | 36 | 135-815 | GROOVED PIN,5/16" x 3", Type E, Hardened | PIN, GROOVED, , D30993 pin 5/16" x 3", Type E, Hardened | | | 37 | D32265 | PIN | - pivot, cyl. to frame (Used on ldr. sn. 4080367 and after) See D30993 | | | 38 | D32264 | RETAINER | PLATE - pin retainer (R.H.) | | | 39 | D32263 | RETAINER | PLATE - pin retainer (L.H.) | | | 40 | 13-816 | BOLT,Hex, 1/2" - 13 x 1", Gr 5, Full Thd | | | | 41 | 192-163 | LOCK WASHER,1/2" | WASHER, LOCK, 1/2" | | | 42 | D31004 | AXLE PIN | PIN - pivot, lift cyl. at lift arm | | | | For service, see Figure 9A. | | | | 43 | D25279 | SNAP RING,M35, Int | - D31004 pin | | | | For service, see Figure 9A. | | | | 44 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, str. (1/8" NPT) | | | 45 | D31265 | PIN | - pivot, hydra-leveling cyl. at lift arm | | | 46 | 135-814 | GROOVED PIN,5/16" x 2 3/4", Type E, Hardened | Pin, Grooved, 5/16" x 2 3/4", Type E, Hardened | | | 47 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, str. (1/8" NPT) | | | 48 | D30979 | X | ARM - loader lift, Includes: Ref. 49 - 53 | | | | For service, see Figure 9A. | | | | 49 | D30935 | BUSHING,47.85mm ID x 57.15mm OD x 33.27mm L | - at frame | | | 50 | D30929 | BUSHING,38.33mm ID x 47.63mm OD x 38.1mm L | - at cyl. rod | | | 51 | D30932 | BUSHING,38.33mm ID x 47.63mm OD x 28.45mm L | - at dump linkage | | | | For service, see Figure 9A. | | | | 52 | D30932 | BUSHING,38.33mm ID x 47.63mm OD x 28.45mm L | - at dump cyl. | | | 53 | D30931 | BUSHING,38.33mm ID x 47.63mm OD x 69.85mm L | - at bucket | | | 54 | D30941 | | LINK - bucket cyl. leveling | | | 55 | D30938 | LARGE PIN | LINK - bucket cyl. with gauge, Includes: Ref. 56 | | | 56 | D31512 | BUSHING,47.75mm ID x 57.15mm OD x 19.05mm L | - links | | | 57 | 26-16108 | BOLT,Hex, 1" - 8 x 6-3/4", Gr 8 | HHCS - 1" - 8 NC x 6-3/4" | | | 58 | 131-20 | LOCK NUT,1"-8, GB | NUT - hex., lock (1" - 8 NC) | | | 59 | D31219 | BUSHING,26.67mm ID x 38.08mm OD x 101.6mm L | SPACER - leveling links, bottom | | | 60 | D31218 | BUSHING | SPACER - leveling links, top | | | 61 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, str. (1/8" NPT) | | | 62 | 219-55 | LUBE NIPPLE,90 Degree Elbow, 1/8" - 27 NPTF | NIPPLE, LUBE, 90º, 1/8" NPT x .84" lg | | | 63 | D31100 | HYDRAULIC CYLINDER | CYLINDER - dump, R.H. (Parts list, Figure 68) | | | 64 | D31101 | CYLINDER ASSY. | CYLINDER - dump, L.H. (Parts list, Figure 68) | | | 65 | D31001 | PIN | - dump cyl. | | | | For service, see Figure 9A. | | | | 66 | D25279 | SNAP RING,M35, Int | - D31001 pin | | | | For service, see Figure 9A. | | | | 67 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, str. (1/8" NPT) | | | 68 | D30945 | DRAG LINK | LINK - dump, R.H. (With gauge) | | | 69 | D30947 | SUN VISOR | LINK - dump, L.H., Includes: Ref. 70 and 71 | | | 70 | D30933 | BUSHING,38.41mm ID x 47.63mm OD x 31.75mm L | - dump link, rear | | | 71 | D30931 | BUSHING,38.33mm ID x 47.63mm OD x 69.85mm L | - dump link, front | | | 72 | D31002 | PIN | - dump links at bucket | | | 73 | D25279 | SNAP RING,M35, Int | - D31002 pin | | | 74 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease (1/8" NPT) | | | 75 | D31000 | AXLE PIN | PIN - lift arms at bucket | | | 76 | D25279 | SNAP RING,M35, Int | - D31000 pin | | | 77 | D11946 | BUCKET - snow, 1 cu. yd. (79-3/8" wide) Machinery item, Includes: Ref. 78 and 79 | | | | 78 | D30932 | BUSHING,38.33mm ID x 47.63mm OD x 28.45mm L | - loader bucket | | | 79 | D20549 | EDGE | BLADE - cutting, 79-3/4" wide | | | 77 | D11947 | BUCKET - tread width, 18 cu. ft. (73-3/8" wide) Machinery item (Use D13021), Includes: Ref. 78 and 79 | | | | D13021 | BUCKET - tread width, 19 cu. ft. (73-3/8" wide) Machinery item, Includes: Ref. 78 and 79 | | | | 78 | D30932 | BUSHING,38.33mm ID x 47.63mm OD x 28.45mm L | - loader buckets | | | 79 | DR10524 | X | BLADE - cutting, 73-3/8" wide | | | 77 | D11949 | BUCKET - dry material, 18 cu. ft. (63-3/8" wide) Machinery item (Use D13023), Includes: Ref. 78 and 79 | | | | D13023 | BUCKET - dry material, 20 cu. ft. (63-3/8" wide) Machinery item, Includes: Ref. 78 and 79 | | | | 78 | D30932 | BUSHING,38.33mm ID x 47.63mm OD x 28.45mm L | - loader bucket | | | 79 | DR10209 | EDGE | BLADE - cutting, 63-3/8" wide | | | 77 | D11948 | BUCKET - light material, 15 cu. ft. (63-3/8" wide) Machinery item (Use D13022), Includes: Ref. 78 and 79 | | | | D13022 | BUCKET - light material, 16 cu. ft. (63-3/8" wide) Machinery item | | | | 78 | D30932 | BUSHING,38.33mm ID x 47.63mm OD x 28.45mm L | - loader bucket | | | 79 | DR10209 | EDGE | BLADE - cutting, 63-3/8" wide | | | 80 | D10946 | GUARD - spill (72" wide) Machinery item (D11947 bucket only), Includes: Ref. 81 and 82 | | | | | D13021, D13022 and D13023 buckets include a "welded on" spill guard. | | | | 81 | 13-820 | BOLT,Hex, 1/2" - 13 x 1-1/4", Gr 5, Full Thd | | | | 82 | 131-10 | NUT,1/2"-13, GB | NUT, LOCK, 1/2"-13, GB | | | 80 | D10235 | GUARD - spill (62" wide) Machinery item (D11949 or D11948 buckets only), Includes: Ref. 81 and 82 | | | | | D13021, D13022 and D13023 buckets include a "welded on" spill guard. | | | | 81 | 13-820 | BOLT,Hex, 1/2" - 13 x 1-1/4", Gr 5, Full Thd | | | | 82 | 131-10 | NUT,1/2"-13, GB | NUT, LOCK, 1/2"-13, GB | | | 83 | D26368 | SUPPORT | SHANK - digging tooth, optional | | | 84 | D27748 | TOOTH | - digging, optional | |
|
|