| № | Номер | Название | Опции | Альт |
|---|
| 1 | D37715 | X | FRAME - loader lift, Includes: Ref. 2 - 6 | |
| 2 | D30935 | BUSHING,47.85mm ID x 57.15mm OD x 33.27mm L | - frame, at sub frame | |
| 3 | D30929 | BUSHING,38.33mm ID x 47.63mm OD x 38.1mm L | - frame, at lift cylinder (Outer lugs) | |
| 3a | D30932 | BUSHING,38.33mm ID x 47.63mm OD x 28.45mm L | - frame, at lift cylinder (Inner lugs) | |
| 4 | D37763 | BUSHING | - frame, at tilt linkage | |
| 5 | D30932 | BUSHING,38.33mm ID x 47.63mm OD x 28.45mm L | - frame, at tilt cylinder | |
| 6 | D30931 | BUSHING,38.33mm ID x 47.63mm OD x 69.85mm L | - frame, at bucket | |
| 7 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight (1/8" NPT) | |
| 8 | 13-816 | BOLT,Hex, 1/2" - 13 x 1", Gr 5, Full Thd | | |
| 9 | 192-163 | LOCK WASHER,1/2" | WASHER, LOCK, 1/2" | |
| 10 | D32264 | RETAINER | PLATE - pin retaining, R.H. | |
| 11 | D32263 | RETAINER | PLATE - pin retaining, L.H. | |
| 12 | D32265 | PIN | - cylinder, at subframe | |
| 13 | REF | INSTRUCTION | CYLINDER - hyd., hydra-leveling (See Figures 264 thru 266 for proper cylinder) | |
| 14 | 135-814 | GROOVED PIN,5/16" x 2 3/4", Type E, Hardened | Pin, Grooved, 5/16" x 2 3/4", Type E, Hardened | |
| 15 | D31265 | PIN | - cylinder mounting | |
| 16 | REF | INSTRUCTION | CYLINDER - hyd., loader lift (R.H.) See Figure 262 for proper cylinder) | |
| 17 | REF | INSTRUCTION | CYLINDER - hyd., loader lift (L.H.) See Figures 258 thru 262 for proper cylinder | |
| 18 | D25279 | SNAP RING,M35, Int | RING - retaining | |
| 19 | D31004 | AXLE PIN | PIN - cylinder, at lift frame | |
| 20 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight (1/8" NPT) | |
| 21 | REF | INSTRUCTION | CYLINDER - hydraulic, tilt (R.H.) See Figures 270 and 272 for proper cylinder | |
| 22 | REF | INSTRUCTION | CYLINDER - hyd., tilt (L.H.) See Figures 270 and 272 for proper cylinder | |
| 23 | 13-16108 | BOLT,Hex, 1" - 8 x 6-3/4", Gr 5 | HHCS - 1" - 8 NC x 6-3/4" | |
| 24 | 131-20 | LOCK NUT,1"-8, GB | NUT - hex., lock (1" - 8 NC) | |
| 25 | D31218 | BUSHING | SPACER - tilt cylinder link, upper | |
| 26 | D31219 | BUSHING,26.67mm ID x 38.08mm OD x 101.6mm L | SPACER - tilt cylinder link, lower | |
| 27 | D37580 | LINK - tilt cylinder, R.H. outer, Includes: Ref. 28 | | |
| 28 | D31512 | BUSHING,47.75mm ID x 57.15mm OD x 19.05mm L | - link | |
| 29 | D40455 | LINK - tilt cylinder, R.H. inner, Includes: Ref. 30 | | |
| 30 | D31512 | BUSHING,47.75mm ID x 57.15mm OD x 19.05mm L | - link | |
| 31 | D30941 | | LINK - tilt cylinder, L.H. outer and inner, Includes: Ref. 32 | |
| 32 | D31512 | BUSHING,47.75mm ID x 57.15mm OD x 19.05mm L | - link | |
| 33 | D25279 | SNAP RING,M35, Int | RING - retaining | |
| 34 | D31001 | PIN | - cylinder, at lift frame | |
| 35 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight (1/8" NPT) | |
| 36 | D30945 | DRAG LINK | ARM - tilt, R.H., Includes: Ref. 37 and 38 | |
| 37 | D30933 | BUSHING,38.41mm ID x 47.63mm OD x 31.75mm L | - arm, at tilt link | |
| 38 | D30931 | BUSHING,38.33mm ID x 47.63mm OD x 69.85mm L | - arm, at bucket | |
| 39 | D30947 | SUN VISOR | ARM, tilt, L.H. link, Includes: Ref. 40 and 41 | |
| 40 | D30933 | BUSHING,38.41mm ID x 47.63mm OD x 31.75mm L | - arm, at tilt link | |
| 41 | D30931 | BUSHING,38.33mm ID x 47.63mm OD x 69.85mm L | - arm, at bucket | |
| 42 | 219-55 | LUBE NIPPLE,90 Degree Elbow, 1/8" - 27 NPTF | NIPPLE, LUBE, 90º, 1/8" NPT x .84" lg | |
| 43 | D25279 | SNAP RING,M35, Int | RING - retaining | |
| 44 | D37287 | PIN | - bucket, upper | |
| 45 | NLS | NO LONGER SERVICED | - bucket, lower | |
| 46 | NSS | NOT SOLD SEPARAT | RESERVED | |
| 47 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight (1/8" NPT) | |
| 48 | REF | INSTRUCTION | BUCKET - loader (See Figures 18 thru 22 for options) | |
