| № | Номер | Название | Опции | Альт |
|---|
| 1 | 107787A1 | HARNESS | - rear, see Fig. 4-29,A 4-33A, 4-44, and 4-58 for continuation of harness, includes: Ref. 1B to JEE0040040 | | | 1 | 130404A1 | HARNESS | - rear, see Fig. 4-29A, 4-33A, 4-44, and 4-58 for continuation of the harness, includes: Ref. 1B, Serial Range: JEE0040040-JEE0042309 | | | 1 | 244237A1 | HARNESS | - rear, see Fig. 4-29A, 4-33A, 4-44, and 4-58 for continuation of the harness, includes: Ref. 1B, Serial Range: JEE0042310-JEE0052700 | | | 1a | 244237A1 | HARNESS | - rear, see Fig. 4-29A, 4-33A, 4-44, and 4-58 for continuation of the harness, includes: Ref. 1B, Start Serial: JEE0052701 | | | 1b | L129852 | CONNECTOR, ELEC | CONNECTOR - speed sensor, included with harness, two on Ref. 1A, 244237A1, harness | | | 2 | A187530 | TEMPERATURE SENDER | SWITCH - hydraulic oil temperature | | | 3 | 515-2348 | CLAMP,4.8mm ID, 10.3mm Bolt Hole, P Type | - P-type, 10.3 mm ID, harness, at filter | | | 4 | 426-616 | BOLT,Hex, 3/8" - 16 x 1", Gr 8 | | | | 5 | 492-11038 | LOCK WASHER,3/8" | | | | 6 | 425-106 | NUT,3/8"-16, Cl 5 | | | | 7 | L18337 | CABLE TIE,9.95"-12.1" lg | STRAP - tie, 15 inch, nylon | | | 8 | 515-23222 | CLAMP,7/8", Insul, 3/8" Bolt | P-type, Included with harness, Uses transmission hardware 7/8", Insul, 3/8" Bolt | | | 9 | L127553 | STUD | ADAPTER - stud, brass, engine ground mount | | | 10 | L127554 | WASHER,0.395" ID x 0.875" OD x 0.064" Thk | - flat, brass, special, 11 x 25 x 2 mm | | | 11 | L127555 | NUT,Hex, 3/8" - 16 | - hex, brass, special, 3/8 inch NC | | | 12 | 515-25254 | CLAMP,1", Insul, 1/2" Bolt | P-type, Included with harness 1", Insul, 1/2" Bolt | | | 13 | 614-12025 | BOLT,Hex, M12 x 1.75 x 25mm, Cl 8.8, Full Thd | - hex, full threads, 12 - 1.75 x 25 mm | | | 14 | 892-11012 | LOCK WASHER,M12 | CLAMP - P-type, at fuel lines on units without air conditioning using hardware Ref. 18 and 19, at bracket on units with air conditioning using hardware Ref. 20, 21, and 22 | | | 15 | 895-11012 | WASHER,13.5mm ID x 24mm OD x 2.5mm Thk | - flat, 13.5 x 24 x 2.5 mm | | | 16 | 515-23190 | CLAMP,3/4", Insul, 3/8" Bolt | P-type, Models with standard steering, Uses existing hardware 3/4", Insul, 3/8" Bolt | | | 17 | L71188 | CLAMP,15.75mm ID, Coated, 13.46mm Bolt Hole, P Type | - P-type, 5/8 inch diameter, replaces item 16 above, on models with auxiliary steering, not shown | | | 18 | N13268 | PRESSURE SWITCH | INDICATOR ASSEMBLY - restriction, electrical, hydraulic oil, parts list Fig. 8-10 | | | 20 | 614-12016 | BOLT,Hex, M12 x 1.75 x 16mm, Cl 8.8, Full Thd | - hex, full threads, 12 - 1.75 x 16 mm | | | 21 | L126713 | BOOT | - plastic | | | 22 | 492-11044 | LOCK WASHER,7/16" | WASHER, LOCK, 7/16" | | | 23 | 425-107 | NUT,7/16"-14, G5 | - hex, 7/16 inch NC | | | 24 | S64612 | BOOT | - rubber | | | 25 | 892-11004 | LOCK WASHER,M4 | WASHER, LOCK, M4 | | | 26 | 825-1404 | NUT,M4, Cl 8 | | | | 27 | 892-11005 | LOCK WASHER,M5 | WASHER, LOCK, M5 | | | 28 | 825-1405 | NUT,M5, Cl 8 | | | | 29 | 221-1693 | TEE,Street, 1/2" NPT | - street, 1/2 inch PT | | | 30 | A166057 | TEMPERATURE SENDER,1/2" - 14 NPTF | SENDER - engine temperature | | | 31 | 493-11020 | LOCK WASHER,5.08mm ID x 12.75mm OD x 1.02mm Thk | WASHER, LOCK, (3/16") Ext-Int Tooth, #10 | | | 32 | 225-20210 | NUT,#10-32, Brass | | | | 33 | L129823 | ELECTRICAL WIRE | WIRE - ground, with resistor, engine coolant temperature, Serial Range: sender-engine | | | 34 | 614-8016 | BOLT,Hex, M8 x 1.25 x 16mm, Cl 8.8, Full Thd | - hex, full threads, 8 - 1.25 x 16 mm | | | 35 | 895-11008 | WASHER,9mm ID x 16mm OD x 1.6mm Thk | - flat, 9 x 17 x 1.6 mm | |
|
|